9 of 9
Basic Operations
During Standby
When the phone is not in use, the LCD displays the phone model no.,
the handset no., the battery icon, and the Signal indicator.
Making External Calls
Using Traditional Dialing
•
Press
and wait for dialing tone.
•
The
icon on handset will be turned on.
•
The LED on the handset and the In Use LED on the base unit
will also be turned on.
•
Use the keypad to dial the phone number. The display shows
the digits as you enter them.
•
If more than 16 digits are entered, the icon will be turned on.
Only the last 16 digits will be displayed.
•
The call timer will display after a while and start timing the call.
To End a Call
•
Press
, or
•
Place the handset back on the base unit.
•
The duration of the call will remain for about 5 seconds after
you hang up.
Using Pre-Dialing
You can enter a telephone number and verify it on the display
before you place the call.
•
Use the keypad to enter the phone number. The display shows
the digits as you enter them.
•
If more than 16 digits are entered, the icon will be turned on.
Only the last 16 digits will be displayed.
•
Press
, the number entered will be dialed out.
Note: If you make a mistake, press
to erase one digit at a time,
or press and hold
for 2 seconds to clear the entire
number and return to Standby.
Using Phonebook Dialing
•
Press
during predial or standby.
•
The display reads ADD ENTRY.
•
Use
to scroll through the records.
•
Press
to view the number.
•
Press
on the selected phonebook record to dial out the
number.
Using Quick Dialing
Each key of
1
,
2
,
3
,
4
,
5
,
6
,
7
,
8
, and
9
can be attached with a
phonebook record.
•
During standby, press and hold the key will dial out the number
directly.
•
The number dialed will be displayed on the LCD.