33 of 33
o
Use
to select ON.
o
Press
. User can answer a call by lifting the handset out of
the base cradle without having to press the
key.
•
To de-activate:
o
Use
to select OFF.
o
Press
. User will need to press the
key to answer a call
no matter the handset is on the base cradle or out of the base
cradle.
Flash Timing
When talking on the phone, pressing
will send a flash signal. User
can select between the two flash timing from this menu.
•
Press
.
Use
to scroll through the menu until the display
reads SETTINGS.
•
Press
. Use
to scroll through the menu until the display
reads FLASH TIME.
•
Press
. Use
to select from the two durations.
•
Press
on a selection to confirm and exit to FLASH TIME.
•
Press and hold
will exit to standby.
Note: Flash timing is different in various countries. User can check with
the local telephone company if not sure.
Dialing Mode
This phone can be enabled to either Tone or Pulse Dialing.
To select:
•
Press
.
Use
to scroll through the menu until the display
reads SETTINGS.
•
Press
. Use
to scroll through the menu until the display
reads DIAL MODE
•
Press
. Use
to select TONE or PULSE.
•
Press
to confirm the selection and exit to DIAL MODE.
•
Press and hold
will exit to standby.
Note: During pulse dialing, Press and hold
, the display will show
‘ ’. All digits dialed after ‘ ’ will be dialed out in TONE.
During pulse dialing, pressing the
and
will display the
digits but they will not dialed out.
‘ ’ can be included in predial, phonebook and service number.
Handset Name
Each handset can have its own name that may be displayed during
standby. User can enter up to 10 alphanumeric characters.
•
Press
.
Use
to scroll through the menu until the display
reads DISPLAY.
•
Press
. Use
to scroll through the menu until the display
reads LABEL.