background image

 
User manual Profline SFM. 
 © Profline                                                                                                           

Specifications are subject to change without notice

 

 

 

FUNCTION KEY'S 

 

The buttons on the front, are function keys (FI-F5). With this function keys all adjustments can be made at the front of the 
SFM. 
 

 

 
Fl: STOP INPUT / MENU BACK-STEP  
F2: STEP RIGHT / INCREASE VALUE  
F3: STEP LEFT / DECREASE VALUE  
F4: CONFIRM (ENTER) 
F5: OPEN MENU / CLOSE MENU 
 
When a value/preset must be changed, it should be selected first. 
* Call MAIN MENU (F5) 
* Select the submenu with the flashing cursor (using F2 or F3) that has to be changed and confirm (F4)  
* Place flashing cursor (using F2 or F3) on the item at the submenu and confirm (F4) 
*

 

Now change the value/preset (using F2 or F3) and confirm (F4) 

* When the value is correct the menu can be closed by pressing F5 (or with Fl to the last menu) 
* The new value will now become active 
 
In short: 
Step I Call menu (F5) 
Step 2 Select (F2 or F3) 
Step 3 Confirm (F4) 
Step 4 Close all menus (F5) or close sub menu (Fl) 
 
Step 2 and 3, depending of the value to be changed, are to be repeated several times. 
 
For quick in- or decreasing a value, F2 or F3 should be hold for more than 3 seconds. After this period, value steps rapidly 
changes until the F-key is released. 
 
 
 

Summary of Contents for SFM







Reviews: