10 of 20
GYROSCOPE CALIBRATION
With the drone on a level surface, Pull both the joysticks to the lower
right position at the same time, and hold in that position for 3-5 seconds.
The four lights on the drone will flash to indicate it is calibrating.
Release the joystick, which will complete the calibration.
This should be carried out before each flight.
GPS LOCATION SEARCH
Once the drone has been calibrated, as shown in the previous steps, the
drone should be placed on a flat surface in an open area in order to for it
to fix its location via GPS. Once the location has been fixed, the rear
lights will stop flashing and will be illuminated.
It can take around 2
minutes for the drone
to fix on its location,
although if the drone
has been used within
the previous hour, this
time is reduced.
