Proflex TRX2 User Manual Download

Page: 11 / 14

TRX2 Elite Electric Treadmill

E&OE

Care, Maintenance and Troubleshooting

Some maintenance activities described may be beyond the scope of some users. For
procedures that you are not comfortable with or have the tools or experience for, have the

unit serviced by a service

centre or qualified technician. • To prevent electrical shock, switch OFF and unplug

the equipment

before cleaning or performing any maintenance tasks. • Before each use, check the running

belt for wear.

Cleaning

The equipment can be cleaned with a soft cloth and mild detergent. Do not use abrasives, solvents or harsh
chemicals. Be careful not to get excessive moisture on the display panel as this may damage it and create
an electrical hazard.

After each use, wipe the unit of any sweat, dirt or liquids. Pay extra attention to the edges of the belt, where it
meets the running boards on each side of the running belt

– keeping this area clean will help prolong the life

of the unit and maintain its performance.

Keep the equipment, especially the display console, out of

direct sunlight to prevent damage to the screen.

Storage

Store the equipment in a clean and dry indoor environment. Never leave or use the unit outdoors. Ensure the
master power switch is

OFF (“

”) and the power cord is un-plugged from wall outlet.

Troubleshooting

The following information may assist in identifying a problem and rectifying it.

Problem

Potential Reason

Correction

Equipment will not
start.

. Equipment not plugged in.

. Safety tether not in place.

. Connect unit to mains electrical supply.

. Place safety tether in correct location.

Belt slips.

Belt loose.

Adjust belt tension.

Belt hesitates when
stepped on.

. Not enough lubrication on

running deck.

. Belt too tight.

. Lubricate running deck.

. Adjust belt tension.

Belt is not centred.

Running belt tension not
even across the rear roller.

Adjust belt alignment.

Display shows "E01"

Communication problem
between drive unit and
console detected.

Check connections between console and drive
unit. If the connectors or wiring is damaged,
replace it.

Display shows "E02"

Drive unit / motor problem
detected.

Check drive unit and motor connections. if the
motor is damaged, replace it.

Display shows "E05"

Electrical protection tripped.

Check mains electrical supply is to specifications.
• Ensure that drive belt is not caught or is unable
to rotate due to obstruction. • Check all
connections. • Check for motor or control circuitry
fault (often indicated by a burning smell) and
replace parts as required.

Display shows "E06"

Power supply protection
tripped.

Check mains electrical supply is to specifications.
• Check all connections. • Check for motor or
control circuitry fault (often indicated by a burning
smell) and replace parts as required.

PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX