8
4.1 Configuring the Ethernet Management Port
After logging in with the newly created admin account, the Ethernet management
port can be configured by running the following command:
Depending on user’s requirements, the IP can be set either dynamic (DHCP) or
static (custom IP). Please follow the instructions to configure the preferred option.
After the configuration is complete, the system is accessible through the network via
SSH and
X2-Manager
(web-based interface) at
https://assigned_IP
.
X2-3200G
can also be directly connected to a computer through its Ethernet
management port. In this case, manual IP policy must be applied to both the unit
and the computer.
▶
Note:
If the computer network interface is only 10/100 Mbps, a special
twisted pair cable must be used instead of a normal patch cable.
For security reasons, an SSL certificate is pre-installed.
.> system.network.set
Summary of Contents for X2-3200G
Page 1: ...www profitap com X2 3200GPACKETBROKER PRODUCTMANUAL ...
Page 2: ...BRING CLARITY INTO YOUR NETWORKS ...
Page 35: ...31 ...
