manualshive.com logo in svg

ProfiTap X2-3200G, Product Manual

Share
Download
ProfiTap X2-3200G Product Manual Download Page 10

6

2.5 LED Functionality

LED FUNCTION / STATE

MEANING / CONTROL

Power status LED for 

PSU1 and PSU2

Fan status LED

Power is not supplied to the device.

PSU is operating normally.

Signal issues:

 

◉

PSU is present, but there is 
no electric current

 

◉

Fan Lock

 

◉

OTP: Over Temperature Protection

 

◉

OCP: Over Current Protection

 

◉

OVP: Over Voltage Protection

 

◉

UVP: Under Voltage Protection

Fans are not initialized

Fan is operating normally.

Fan is faulty. Check the back of the unit 

to see which fan is the faulty one.

OFF

Green

OFF

Green

Orange

Orange

Link/Speed LED 

mode for ports 1–32 

(QSFP28)

System status LED

No link established on the port.

Active link at 100 Gbps.

Data is transmitted at 100 Gbps.

Active link at 40 Gbps.

Data is transmitted at 40 Gbps.

System is functioning properly.

System warning.

OFF

Green

Yellow

Green

Blinking 

Green

Blinking 

Yellow

Orange

Summary of Contents for X2-3200G





































Reviews:

No comments

Brands by name

Popular brands

Load more brands