Profim Accis Pro, Assembly And Operating Instructions Manual

Page: 10 / 40

General instruction concerning product use
Chairs, armchairs and sofas designed for public
places as well as office chairs and armchairs must
be used in accordance with their intended purpose
and with due care. Using a chair in any way other
than prescribed (standing, sitting on armrests etc.)
poses a risk and may end in an accident.
Some remarks on proper chair use:
1. The height and depth of the seat should be
adapted to the height of the user so that the whole
surface of the profiled seat is occupied. Only then
the proper support is ensured for the back.
2. The backrest should at all times support the us-
er’s spine, which is why special attention should be
paid to the support of the lumbar part.
3. Frequent changes of the seat position during
which the chair moves accompanying the moves of
the sitting person are recommended.
Leather
Leather is a natural material. All scratches, scars, in-
sect pricks, differences in the texture and shades are
natural and do not lower its quality. Proper mainte-
nance should be performed with the use of special
agents creating a protection layer, resistant against
water and oil substances.
Upholstery
Only delicate cleaning liquids should be used when
removing any dirty spots.
Plastic Elements
Any agents based on soap are proper for cleaning
plastic elements.
Operation:
1. Furniture should be protected from direct sunbeam.
2. Leather furniture should not be placed close to
any heating. Minimal distance from source of heat
is 30 cm.
3. Avoid humidity.
4. Protect the upholstery against fat, sweat, grease,
etc. If dirty, use appropriate cleaners.
10