background image

Speaker 

Output

R

L

Bridged

REM

GND

B+

Fuse

Connect the amplifier to the car's battery.

At times, the amplifier will need to draw large levels of current that cannot be provided by any 
circuit in the car's fuse box.  We recommended using an 4 to 10 gauge power wire for your 
connections depending on the amplifier and length of the wire.  Strip one end of the wire to 
connect to the terminal on the amplifier marked B+.  Loosen screw terminal and connect bare 
wire and tighten.  Use caution to  make sure no stray wire stands come in contact with 
surrounding terminals causing short circuits. Run the wire directly to the positive terminal of 
the car's battery.  Make sure to use an in-line fuse within 12” of the car's battery to protect 
the electrical system and amplifier against short circuits and/or power surges.

Connect the ground terminal of the amplifier to the car's chassis.

For the ground connection, use an 4-10 gauge wire (black) to connect to the terminal marked 
GND and then connect it to the car's chassis.  Try to keep the length of the cable as short as 
possible, preferably less than 6".  Also make sure that the point on the car where the 
connection is to be made is free of paint and dirt.  

Connect the remote terminal of the amplifier to a swit12V source.

This connection allows the amplifier to be turned on and off with the power control of the 
radio.  If the radio has a REMOTE output terminal, connect it to the amplifier's terminal 
marked REM (using a 16 gauge wire or heavier).  Now when the radio is turned on, the amplifier 
will automatically turn on.  This connection can also be made to the radio’s Power Antenna wire.

IMPORTANT!

  Before making any connections, disconnect the car’s battery until the 

installation is completed to avoid possible damage to the electrical system.

P

OWER CONNECTIONS

CAR BATTERY

+12V

CAR BATTERY

+12V

-

-

+

+

94.7

94.7

RADIO'S REMOTE

TURN-ON OUTPUT

RADIO'S REMOTE

TURN-ON OUTPUT

IN-LINE POWER FUSE

MOUNTED WITHIN 12"

FROM BATTERY RECOMMENDED

IN-LINE POWER FUSE

MOUNTED WITHIN 12"

FROM BATTERY RECOMMENDED

(NOT PROVIDED)

(NOT PROVIDED)

6

Summary of Contents for California CA1200





















Reviews: