background image

I

NTRODUCTION

Congratulations on your purchase of a California state-of-the-art power amplifier.  Your 
selection of a California car audio product indicates a true appreciation of fine musical 
reproduction.  Whether adding to an exi sting system or including your California amplifier in a 
new system, you are certain to notice immediate performance benefits. 

K

EEP YOUR SALES RECEIPT

Take this time to attach your sales receipt to the manual and put in a safe place.   In case of any 
unforeseen reason this product may need warranty service, your receipt will be necessary to 
establish purchase date.

R

ECOMMENDATION

A power amplifier’s performance is only as good as its installation.  Proper installation will 
maximize the system’s overall performance.  It is recommended   that you have our product 
installed by an authorized Profile retailer.  However, if you decide to install it yourself, please 
carefully read through this manual and take your time to do a quality installation.

WARNING!

Exposure to high power sound system can cause hearing loss or damage. 
Listening to your system at loud levels while driving, will impair your ability to 
hear traffic sounds and emergency vehicles. Use common sense when listening 
to your system.

WARNING!

Exposure to high power sound system can cause hearing loss or damage. 
Listening to your system at loud levels while driving, will impair your ability to 
hear traffic sounds and emergency vehicles. Use common sense when listening 
to your system.

IMPORTANT!

  Before making any connections, disconnect the car’s battery 

until the installation is completed to avoid possible damage to the electrical 
system.

Serial #

Model #

2

Summary of Contents for California CA1200





















Reviews: