Proficient M8, Installation And User Manual

Page: 9 / 32

9
INSTALLATION
2 INCH MINIMUM
FOR PROPER AIR FLOW
1 INCH MIN
FOR PROPER
AIR FLOW
1 INCH MIN
FOR PROPER
AIR FLOW
ALWAYS KEEP TOP AND
BOTTOM VENTS CLEAR
TO MAINTAIN PROPER AIR FLOW,
PLACE OTHER COMPONENTS
ON SEPARATE SHELVES
VENT HOLES IN SHELF IMPROVE AIR FLOW
M8
Diagram 3
M8 Air Flow Requirements
AIR FLOW
The Proficient M8 is designed to run cool under most normal operating conditions but may run warm with multiple channels run-
ning at moderate to high output. It is typical for an eight-channel amplifier to generate a certain amount of heat dissipation that
needs to be properly ventilated.
Closed spaces such as equipment cabinets and racks can get hot with the heat generated by microprocessors and motors in vari-
ous devices. Providing proper ventilation for good air flow will help keep the temperature down and protect not only the M8 but
all system components and help preserve their longevity.
When installing the M8 a few easy steps should be taken to assure proper air flow:
1.
Never block the vent holes on the top or bottom of the M8.
2.
Never remove the feet on the bottom of the M8.
3.
Leave at least 2 inches above and 1 inch on each side of the M8 for free air flow.
4.
Whenever possible, provide vent holes in the shelf under the M8 to increase air flow into the bottom of the unit.
5.
Leave the back of the cabinet as open as possible for good air circulation.
6.
Place other system components on separate shelves.
7.
Install fans in cabinets and racks when equipment is generating high heat levels.