Profi Cook PC-DDK 1048, Instruction Manual

Page: 29 / 34

29
Cleaning
WarNING:
• Before cleaning, switch the device off and pull the power plug.
• Allow the appliance with insert pot to cool.
• Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or fire.
CaUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• The individual parts are not dishwasher-safe.
Always clean the appliance and accessories after use.
1. Remove the insert pot and accessories.
2. Always clean the inside and outside of the housing with a damp dishcloth.
3. Pull the condensation collector (13) down to empty and clean it. After drying, slide it up again onto the
housing until it clicks into place.
4. Clean the insert pot and accessories in a bowl of hot water. To help remove stubborn dirt, you can use
a nylon brush.
5. Then dry everything off.
Lid
1. Pull off the pressure regulator (3) by turning it. Clean it under running water.
2. Remove the sealing ring (5) from the inside of the lid. Clean it in a bowl of warm water. Rinse and dry
thoroughly.
3. Pull off the cover of the pressure regulator valve (6). Check that the valve is not blocked by holding it
against the light. If necessary, remove food residues with a toothpick. Clean the cover under water with
a nylon brush and then dry it.
4. Clean the lid with a sponge and detergent under running hot water. Wipe it dry.
5. Check the mobility of the float valve (2): Hold the lid horizontally with the float valve facing upwards.
The float valve must be easily pushed in without resistance.
6. Check the sealing ring for damage. There must be no cracking. If the sealing ring is damaged, do not
use the appliance! Contact our customer service at www.sli24.de .
Insert the sealing ring again by pressing it on the inner rim of the lid under the metal ring. The metal
ring must be positioned in the groove of the sealing ring. If the sealing ring is incorrectly positioned, the
appliance will not function.
7. Fit the cover back onto the pressure regulator valve.
8. Fit the pressure regulator back onto the valve.