E-13
USB Interface
This interface is for connecting USB compatible devices.
The USB port on the unit's Front face is USB Ver. 1.1 compatible.
The USB ports (2 ports) on the unit's Bottom face are USB Ver. 2.0 compatible.
PCMCIA Interface (PCMCIA)
These interfaces (2) are used to attach a PCMCIA Type II units.
Sound Interface
This interface uses 3 mini-pin jack connectors.
Expansion Unit Interface
This interface is used to attach a PCI unit.
5
Installation
• Before installing the PS-A into a cabinet or panel, check that the installa-
tion gasket is securely attached to the unit.
• A gasket which has been used for a long period of time may have scratches
or dirt on it, and could have lost much of its water resistance. Be sure to
change the gasket at least once a year, or when scratches or dirt be-
come visible.
• The corresponding gasket is CA3-WPG15-01.
• Be sure the gasket's seam is not inserted into any of the unit's corners,
only in the straight sections of the groove. Inserting it into a corner may
lead to its eventually tearing.
• To ensure the installation gasket's maximum level of moisture resis-
tance, be sure the gasket's seam is inserted as shown into the panel's
bottom face.
Confirm the Installation Gasket's Positioning
It is strongly recommended that you use the installation gasket.
Place the PS-A on a level surface with the display panel facing downward.
Check that the PS-A’s installation gasket is seated securely into the gasket’s groove,
which runs around the perimeter of the panel’s frame.
Gasket
Rear of PS-A unit
About Fan Cover
When installing the PS-A unit, or when attaching an optional item to the
PS-A unit, do not hold the PS-A unit by its rear-face fan cover while
performing the work. Doing so may damage the fan cover or cause the
cover to fall off.
