Manufactured for • Valmistuttaja • Tillverkad för • Произведенодля • Toodetud • Ražošanas pasūtītājs
• Kieno užsakymu pagaminta • Rautakesko Ltd., Finland. P.O. Box 75, FI-01301 VANTAA. © Rautakesko
Manufactured for • Valmistuttaja • Tillverkad för • Произведенодля • Toodetud • Ražošanas pasūtītājs
• Kieno užsakymu pagaminta • Rautakesko Ltd., Finland. P.O. Box 75, FI-01301 VANTAA. © Rautakesko
ENGLISH
INSTRUCTION MANUAL IFH01-20H
Introduction
To get the most out of your new fan heater, please read through these instructions and the attached
safety regulations before use. Please also save the instructions in case you need to remind yourself of
the fan heater’s functions at a later date.
Technical specifications
Voltage/frequency: 230V ~ 50Hz
Power rating: 2000 W
Settings:
3 (650 W, 1300 W and 2000 W)
Temperature:
Continuously adjustable 0-40 °C
Dim.:
197x210x303mm
Weight: 4.0 kg
IP classification:
IP24
Requires at least a 10 A fuse
Housing of steel plate and heat-resistant lacquer
Supplied complete with cord and plug
The fan heater dials
1. Function selector with three power settings
2. Thermostat dial
= DO NOT COVER
Special safety regulations
• The fan heater is not suitable for use outdoors in damp weather, in bathrooms or in other wet
or damp environments.
• Please note that the fan heater can become very hot and should, therefore, be placed at a
safe distance from flammable objects such as furniture, curtains and similar.
• Do not cover the fan heater.
• Do not place the fan heater immediately under a wall socket.
• Do not connect the fan heater using an on/off timer or other equipment which can
automatically switch the device on.
• The fan heater must not be placed in rooms where flammable liquids or gases are used or stored.
• If an extension cord is used, it must be as short as possible and always be fully extended.
• You must not connect other appliances to the same mains socket as the fan heater.
• Heater can’t using in bath-room,shower stall and Pool directly.
• If the cord of heater was damaged ,it must be repaired by manufacturer or maintenance point
• Make sure heater is always under surveillance and keep children and animals away from it
This appliance is not intended for use by person (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Use
• Position the fan heater so that it stands upright on a firm surface and at a safe distance
from wet environments and flammable objects.
• Connect the fan heater to the mains.
• Set the thermostat dial to the maximum temperature.
• The fan heater will switch on when the function selector is set to one of the three
power settings.
• Once the room reaches the required temperature,heating element will stop working but fan also working.
Once the temperature decreased, The heating element will be working. The fan heater now starts and stops
automatically and thus keeps the room temperature constant.
