18
5.2 - CONNECTION TO THE DMX CHAIN
The connection to the DMX chain can be done with the transceiver SG AIRBOX (sold
separately) or cable.
WIRELESS CONNECTION
-
Connect the SG AIRBOX to the DMX console and set it up as transmitter (TX) by pressing
down the green button.
-
In the projector enter in the menu UDNH and select ON, press ENTER.
-
All the projectors have to be linked to the transmitter, by following the next steps:
1.
After the projector is switched on, and if there are no new transmitter, the projector
will connect to the old transmitter automatically.
2.
If the projector has to be linked to a new transmitter, it needs to clear the old
wireless settings:
a.
Enter in RELE menu, press and hold ENTER for 10 seconds.
b.
When the wireless status indicator LED switches OFF, the projector is unlinked.
3.
To link the projector to a new transmitter, follow the next steps:
a.
Press and release PAIRING button on the transmitter.
b.
The LED wireless status on the projectors will start to fast flashing and then stay
on. Pair success.
It is possible to remove at the same time, the wireless link between a group of projectors and
their transmitter:
press and hold for about 5 seconds
the PAIRING button on the transmitter
and release when the relative status led blinks. The wireless link in all the projectors will be
removed (Wireless statue LED indicator off).
Wireless status LED indicator
LED status
Description
LED status on
The projector is receiving wireless DMX signal from the
transmitter
LED status slow
flashing
The projector is already linked to the transmitter, the
transmitter is ON but is not transmitting the DMX signal to the
projector
LED status fast
flashing
The projector is still linked to an old transmitter, and it is not
receiving no type of signal from it
Indicatore spento
The projector is not linked to transmitters and wireless is OFF.
Consolle DMX
