22
CONFIGURATION
Some functions of PROEVAC system can be configured from the front panel of the main central
unit, other functions must be set by PC throughout an appropriate and supplied software
PROEVAC.
Programmable functions throughout front panel are :
−
alarm reset.
−
Zone Scan Module.
−
Zone module for status illustration .
−
Zone module for configuration illustration.
−
Date and time setting.
−
Audio setting (music on/off).
−
Chime tone setting.
−
VOX input setting.
−
RS232 connections setting.
−
Local monitor setting.
−
Pre-recorded voice messages listening.
−
Events log visualisation .
−
General Reset of the central unit and default status setting.
Setting from the panel:
Press
Enter
(ENT) when the display visualise system status
OK
you can access to the
different functions. The functions are cyclic for each Enter key press. To modify value/data use
fleche keys display. modification has an effect on following press ENTER key.
Programmable functions throughout PC serial input are as follows:
−
Alarm reset .
−
Zone module scan .
−
Zone module status illustration .
−
Zone module configuration.
−
Event log configuration.
−
Zone module configuration setting.
−
Remote input configuration setting.
−
Full system memory setting.
−
Recall and reset for back up setting .
−
Event log administration and archives .
−
Text message sent to microphone stands.
−
Remote input activation simulation.
−
MSG input administration and simulation
−
Serial communication Text.
