PROEL M1622USB, User Manual

Page: 19 / 67

19
bigger main mixer console.
57. GROUPS 1-2 jack output
These JACK connectors provide an unbalanced line-level signal from the GROUPS 1-2 stereo bus signal overall controlled
by the GROUPS 1-2 FADER level control.
58. MAIN MIX INSERT Input output
This is where you connect serial e ff ects before the MAIN MIX FADER control. These serial e ff ects usually are compressors
or equalizers. The send is low-impedance (150 ohms), capable of driving any line-level device. The return is high-
impedance (10k ohms) and can be driven by almost any device. Specialty “Y” cables, designed just for this applica on,
are widely available on shops. Specialty “Y” cables, developed just for these jacks, are widely available on shops. Proel
suggested type is DHT540 (1.8 mt - 5.9 ). See also connec on chapter on this manual.
59. MAIN MIX L & R xlr and jack output (balanced)
These XLR and jack connectors provide a balanced line-level signal that represents the fully mixed stereo signal
controlled by the MAIN MIX fader. Connect these to the inputs of your power ampli
fi er, powered speaker or processors
(equalizers, mul -band compressors and so on).
60. 2TRK inputs
Use these unbalanced RCA connectors to patch the output of a player, such as an analog tape deck, MP3 player, CD/DVD
player or a Personal Computer.
61. USB/2TRK IN level control
It adjusts the level of the 2TRK INPUT and USB input (audio signal from PC).
62. MIX - CH15/16 switch
This switch routes the 2TRK IN or USB input signal directly to MAIN MIX outputs or to the channel 15/16. Rou ng the
signal to channel 15/16, you can use all features of the stereo channel before sending the signal to the MAIN MIX:
equaliza on, aux sends and the internal e
ff ect processor.
63. 2 TRK OUT PEAK detector
If the peak LED fl ashes mean that the signal is too high, near to the clipping the output stage. In this case, reduce the
level of the USB/2TRK OUT level control.
64. MIX - AUX 1-2 switch
This switch selects which signal is sent to the 2TRK OUT and to the USB port. Choosing the MAIN MIX signal you can
record a whole mix session such as a live performance. Choosing AUX 1-2 you can record ll two di
ff erent instruments
in two di ff erent tracks of your DAW recording so ware, rou ng them thru AUX 1 and AUX 2 respec vely and using the
MAIN MIX for monitoring.
65. USB/2TRK OUT level control
It adjust the level of signal sent to the 2TRK OUTPUT and to the USB port. This control is a er the MAIN MIX fader
control.
66. 2TRK outputs
Use these unbalanced RCA connectors to send out the MAIN MIX or AUX 1/2 signals to a recorder, such as an analog
tape or an A/D converter connected to a Personal Computer.
67. USB PORT socket
It routes the 2TRK OUT and the 2TRK IN through the USB port in crystal-clean, 16-bit, 44.1 kHz stereo digital audio. Use
the M1622USB as a high-quality soundcard for recording and playback with Windows and Macintosh computers.
VERY IMPORTANT INFORMATIONS:
- The M1622USB internal USB soundcard needs a personal computer with a USB 2.0 port and a Windows (XP or later)
or Mac OSX (10.3 or later) Opera ng Systems.
- The internal USB soundcard DOESN'T REQUIRE A DEDICATE SOFTWARE DRIVER to work with Windows or Mac OSX.
- For in/out signal rou ng inside the computer and the DAW so ware refer to the documenta on included with the
computer and DAW so ware.
- Tipically, a er you have connected the USB cable and powered on the mixer, the M1622USB soundcard is visible from
the computer and DAW so ware as: "USB Audio CODEC" (or with a similar name, depending on the OS version).
68. EQ IN / BYPASS switch
Engaging this switch you bypass the 7-band STEREO graphic equalizer, whether is used on MIX outputs or on AUX
sends.
69. MIX L / AUX 1 switch
This bu on assigns the LEFT channel of the 7-band STEREO graphic equalizer to MIX LEFT (switch released) or to AUX
1 send (bu on pressed). Use the equalizer on the MIX outputs to correct the response of your main speaker system or