PROEL 164935, User Manual

Page: 12 / 28

12
35. 18V~ supply socket input
Here’s where you plug in your mixer’s external power supply. You should always connect your power supply
to the mixer before you plug the power supply into an electrical outlet.
36. POWER switch
Switch this one on and your mixer has power. Switch it off and it doesn’t. Make sure that all master output
knobs are turned all the way down when powering your mixer up or down.
37. Power cable hook
Use this hook to prevent power cable drawing, simply go through it before connecting the cable into the
18V~ socket.
TECHNICAL SPECIFICATION
Type Data Connectors
Mic Input 1-6
sensitivity
from -10 to -50 dB
Balanced XLR-F
impedance
2 Kohm
Line Input 1-6 sensitivity
from +20 to -20 dB
Balanced JACK
impedance 10 Kohm
Lo cut 75Hz, 18dB/oct.
EQ HIGH (shelving) ±15 dB @ 12KHz
MID (peaking)
±15 dB @ 2.5KHz
LOW (shelving)
±15 dB @ 80Hz
Compressor 1-2
Fet
1 control knob
Line Input 7-10 sensitivity
-10 dB
Balanced JACK, RCA
impedance 10 Kohm
MAIN MIX output
nom. out level
+4 dBu
Balanced JACK and XLR-M
C. ROOM output
nom. out level
0 dBu
Unbalanced JACK
FX SEND output
nom. out level
0 dBu
Unbalanced JACK
HEADPHONES output min. impedance 32 ohm Stereo JACK
max. out level (2x) 193 mW
Effects 100 presets
A/D and D/A converters 24 bit
DSP resolution 24 bit
Controls 2-DIGIT display, DIAL, PEAK LED, MUTE
switch, MUTE footswitch
Maximum level
all outputs
+22 dBu
Crosstalk
meas. at 1 KHz
> 82 dB
HUM & Noise unweighted
< -93 dBu
THD + Noise at +4dB, 1kHz < 0,008 %
Dimensions (WxHxD) 275 x 275 x 76 mm
Weight 2,50 kg
Supply 18 VAC 1000 mA
use only supplied AC/AC ADAPTER
Mains Supply Voltage 110-120 VAC (±10%) 50 / 60 Hz (US plug)
230-240 VAC (±10%) 50 / 60 Hz (EU plug)
240 VAC (±10%) 50 / 60 Hz (UK plug)
Consumption 34 W