Produal Oy
Copyright © 2020 Produal Oy - All rights reserved - 07/2020
PS
6001TRI
- 10/28
Web-site:
www.produal.com
Enquiries: T:
+358 10 219 9100
E:
Frost Icon
Frost icon can be set via network to display frost
condition (or defrosting).
21
.5
°C
Room
20
.1
°C
Target
A
FROST ICON
Cleaning Mode
After entering FURTHER INFORMATION screen, by selecting the CLEANING icon, it is possible to
activate the cleaning mode. The TRI will enter a "Clean Screen" state where all touchscreen presses
are ignored and 30 second countdown timer is displayed. This allows cleaning of the interface.
A/C and Lights Buttons
It is possible to enable A/C and LIGHTS buttons. The
buttons and their current status is displayed on the
front screen.
21
.5
°C
Room
20
.1
°C
LIGHTS
STATUS, AND
ON/OFF
SWITCH
LIGHTS
ON
LIGHTS
OFF
A/C STATUS,
AND ON/OFF
SWITCH
A/C ON
A/C OFF
When touching the buttons, the Lights and/or AC
Icon are either swithed ON or OFF. The status of the
buttons is available over the network. It is also
possible to override the Icons ON or OFF over the
network.
The buttons are enabled through the Maintenance
Mode in the Display settings.
Energy Ring Display
The TRI has a large ring around the target temperature ("energy ring"). The ring colour can be set
from the network, or it can automatically change density between red-grey-blue by calculating the
difference between the target and sensor 1/2/3 temperature.
The ring colour has the following options:- .
RING COLOUR ADJUSTABLE
OVER NETWORK
RED
BLUE
WHITE
GREEN
ORANGE YELLOW MAGENTA CYAN
0 = White
1 = Red
2 = Blue
3 = Green
4 = Orange
5 = Yellow
6 = Magenta
7 = Cyan
8 = Sensor 1
9 = Sensor 2
10 = Sensor 3 (Default)
