Prodigy
r
Manual Powder Spray Gun
3
Part 1053680E05
E
2007 Nordson Corporation
Action in the Event of a Malfunction
If a system or any equipment in a system
malfunctions, shut off the system immediately and
perform the following steps:
S
Disconnect and lock out electrical power. Close
pneumatic shutoff valves and relieve pressures.
S
Identify the reason for the malfunction and
correct it before restarting the equipment.
Disposal
Dispose of equipment and materials used in
operation and servicing according to local codes.
Description
The Prodigy Manual Powder Spray Guns use
specially designed conical and flat-spray nozzles to
atomize, shape, and spray dense-phase powder
delivered by Nordson HDLV
r
(high-density powder,
low-velocity air) pumps.
The spray gun is available in a standard length and
a short length.
Features
S
8-mm tubing used for powder delivery
S
Separate high voltage and powder paths.
S
Special pattern control trigger toggles between
user-programmable high and low pattern air
and powder flows.
S
Shipped with a 70
_
conical nozzle and a
dual-slot flat-spray nozzle. Optional conical, flat
spray, cross, and pinpoint nozzles are available.
S
User-friendly controller with LCD display.
S
Up to 10 user-programmable coating recipes.
1
2
3
4
5
6
7
8
9
Figure 1
Prodigy Manual Powder Spray Gun
1. Gun
body
2. Adapter
3. Conical
nozzle
4. Nozzle
electrode
5. Pattern control trigger
6. Trigger
7. Powder tubing (8 mm)
8. Control
cable
9. Pattern air fitting (6 mm)
Note: Powder and pattern air tubing are not shipped with the spray gun. Tubing is included in manual gun systems.
