1
2
3
4
5
6
7
Place base on flat ground. Insert bottom
pole with angle at the top.
2
Insert a bolt
(A)
into large hole on basket,
then screw on washer
(D)
then nut
(E)
.
Place basket on top of bottom pole so that
the bolt lines up with the cutout.
3
Insert top pole into basket with the angle
facing down. Line up cutout so that it is
resting on the bolt.
4
Screw in two of the set screws
(C)
using
the provided allen key to tighten the poles
into place.
5
Place the bottom rings of the chain
assembly over the top pole followed by the
top band.
6
Insert a bolt
(A)
through the large hole on
top band assembly, then screw on washer
(D)
and nut
(E)
. Secure top band in place
by screwing in two set screws
(C)
.
7
Lift chain ring attached to chain assembly
above the four holes on the top pole.
Screw in the four shoulder bolts
(B)
before
releasing the chain ring. The chain ring
attached to the chain assemblys should
now be resting on the four shoulder bolts.
T3 PROFESSIONAL DISC GOLF TARGET
ASSEMBLY INSTRUCTIONS
WWW.PRODIGYDISC.COM
