13
PULSE
(Perfect pulse system)
Your current heart rate will display on the lower right LCD in beats per minute (BPM). Place the palms
of your hands on both contact pads and the monitor will display heart rate. (See diagram below.)
NOTE
1. If pulse value is not preset, the monitor will display the default value at 90 BPM.
2. If no pulse signal input within 16 seconds, the display will indicate “P”. It is a power saving function.
Press the up & down keys to restart pulse function.
RESET
Simply press RESET key and all
displays will zero except accum-
lated distance.
SPECIFICATIONS
FUNCTIONS
Current Speed
0.0 - 99.9 MPH or KPH
Calorie Consumption
0.0 - 99.0 - 100 - 999
Elapsed Time
00:00 - 99:59 (Minute:Second)
Trip Distance
0.00 - 999.9 MPH or KPH
Pulse Rate
40 - 240 BPH
DISPLAY
Liquid Crystal Type
CONTROLLER
4 bit, 1 chip microprocessor
SENSOR
Magnetic, non-contact
POWER SOURCE
Requires 2 “AA” batteries
OPERATING TEMPERATURE 0
0
C - +40
0
C (32
0
F - 104
0
F)
STORAGE TEMPERATURE
-10
0
C - +60
0
C (14
0
F - 140
0
F)
BATTERY REPLACEMENT
Note: Removing batteries will erase all stored
function readings.
1. Remove battery door from monitor.
2. Carefully remove old batteries.
3. Replace with 2 “AA” batteries and close battery
door.
BATTERY
DOOR
2 “AA”
BATTERIES
Model CTE2000E Children’s Circuit Training & Spinning Combo Bike
