12
Monitor Operation
AUTO POWER ON/OFF
The monitor will be turned on automatically by pressing any
key or start exercising. The monitor will turn off automatically
if it does not detect any signals for 4 minutes.\
AUTO START/STOP
When you start exercising the monitor will display the prog-
ress of the exercise. When you stop exercising all functions
will remain displayed untill monitor turns off or you continue
exercising.
TIME
Time is displayed at the top left of the monitor and will count
up in one second increments.
TO PRESET TIME
1. Press MODE key until the TIME window is flashing.
2. Press SET key to increase and stop when it reach-
es the desired time.
3. When you start exercising the time will count down.
4. It will beep for 12 seconds to indicate the comple
tion of the workout. Press any key to stop beeping.
NOTES
1. To preset DISTANCE, CALORIE & MAXIMUM PULSE RATE, please refer to above proce
dure for preset TIME.
2. It is recomended to preset one function only at a time. If setting more that one function,
monitor will beep when reaching any of the default values.
3. The PULSE display will not beep after reaching the preset value. The display will flash con
tinuously while actual heartrate detected is over the preset value.
4. Press MODE key and setting will start for TIME, DISTANCE, CAL0RIES & PULSE. To skip a
function, do not press MODE again untill display stops flashing.
ACCUMLATED DISTANCE
Press and hold RESET key, TIME window will show accumlated distance. After releasing key all dis-
plays will reset to zero.
SPEED
Current speed will display in the left 2nd window.
DISTANCE
The distance will display in the left 4th window.
CALORIE
The calories burned will display in the 3rd window.
Model CTE2000E Children’s Circuit Training & Spinning Combo Bike
