16 PRODIGIT
ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ
RANG
Purpose :
Select the operating full scale current range.
Command syntax :
RANG{SP}{1｜2}{;NL}
Description :
This command selects the full scale current range of the Electronic load. There are two
full scale current range for each 3320 series Electronic load module. Table 4-3 shows the
range I/II full scale current for each 3320 series load module.
When RANG command is excuted, the values of the current level are adjusted as follow:
1.IF the existing current setting is within the new range. Then the current level does not
change.
2.IF the existing current is setting in not within the new range. Then the current level
is set to the maximum of new range.
The maximum load current level is shows in table 4-3.Table 4-3 maximum full scale
current level for each module.When the programming load level setting is greater than
the maximum current level of each range of each module, then the load current will
adjust to the maximum current level which is listed in table 4-3.
MODEL
3320
3321
3322
3323
3324
3325
RANGE I
3.072
6.142
1.024
1.024
0.511
1.535
RANGE II
30.72
61.42
10.24
10.24
5.11
15.36
Table 4-3 Maximun load current level
RECALL
Purpose :
Recall the state of load level and load status which is stored by GPIB STORE command.
Command syntax :
RECALL{SP}{1｜2｜3}{;NL}
Description :
This command is used to recall the non-volatile memory state which is stored into the
memory by GPIB store command, up to 5 states can be recalled.
Example :
a.RECALL 1
b.RECALL 4
SHOR
Summary of Contents for 3301A
Page 1: ...3301A E S N 90033013 rev A...
