4096-535
PRODELIN CORPORATION
3.8M C-BAND Rx/Tx ANTENNA SYSTEM
3
SECTION I
GENERAL INFORMATION
1.0
INTRODUCTION
This manual describes the assembly and installation of Prodelin's 3.8M C-Band
Rx/Tx antenna system The Prodelin 3.8M is a rugged, reliable antenna system
that will operate at C-band frequencies with high efficiency and at the same time
successfully withstand the effects of the environment.
These instructions are listed by sections that cover all areas of assembly and
installation. Additional sections are included in the manual to provide information
on antenna alignment to the satellite and maintenance.
1.1
UNPACKING AND INSPECTION
1.
UNPACKING & INSPECTION -
The antenna containers should be
unpacked and inspected at the earliest date to ensure that all material has
been received and is in good condition. A complete packing list for each
major component is supplied.
CAUTION: DO NOT DRAG REFLECTOR SUPPORT FRAME ON THE
ADJUSTMENT THREAD RODS AS THESE ARE FACTORY SET AND
MUST NOT BE ALTERED!!
2.
FREIGHT DAMAGE -
Any damage to materials while in transit should be
immediately directed to the freight carrier. He will instruct you on the
matters regarding any freight damage claims.
3.
MATERIAL - MISSING OR DAMAGED -
Any questions regarding missing
or damaged materials that is not due to freight carrier should be directed
to Prodelin's Customer Service Department at:
PRODELIN CORPORATION
1500 Prodelin Drive
Newton NC 28658
USA
(828) 464-4141