4096-535
PRODELIN CORPORATION
3.8M C-BAND Rx/Tx ANTENNA SYSTEM
25
Refer to the part list and figure 7 for this section. Follow the instructions in the listed
sequence. Do not tighten any hardware until instructed.
1.
Place feed mounting bracket (item 2) on the feed support and attach with 5/16-18
x 1.00 bolts, flatwashers, lockwashers and hex nuts (items 5,6,7,8). Tighten
securely. Note that the smaller opening (2.75" dia) is for the feed horn and should
be pointed towards the reflector.
2.
Place the feed assembly (item 1) into the cradle of the feed mounting bracket
and
secure by placing the feed horn top clamp (item 3) in position and secure with (2)
1/4-20 x 2.50 bolts, lockwashers and flatwashers (items 10, 11, 12). Tighten
securely.
3.
Place the circular polarizer top clamp in place and secure with (2) 1/4-20 x 3.00
bolts, lockwashers and flatwashers ( items 9, 11, 12 ). Tighten securely. The
antenna system in now ready to be aligned to the satellite.
