4096-535
PRODELIN CORPORATION
3.8M C-BAND Rx/Tx ANTENNA SYSTEM
17
STEP 7:
STEP 8:
A) Position quadrant 1 (quadrant 2 for
inverted) to the top left side of the
frame as shown.
B)
Place Spacers as in step 5 and Detail
A.
C) Secure the quadrant to the frame with
1/2” hardware ( Detail B ). Note that
there are 3 different 1/2” bolt lengths:
Location A = (items 23, 25, 26)
Location B = (items 22, 25, 26)
Location C = (items 24, 25, 26)
D) Secure Quad 1 and 2 together with
3/8” hardware (items 28, 29, 30, 31)
See Detail C.
A) Position quadrant 4 (quadrant 3 for
inverted) to the top right side of the
frame as shown.
B)
Place Spacers as in step 5 and Detail
A.
C) Secure the quadrant to the frame with
1/2” hardware ( Detail B ). Note that
there are 3 different 1/2” bolt lengths:
Location A = (items 23, 25, 26)
Location B = (items 22, 25, 26)
Location C = (items 24, 25, 26)
D) Secure Quad 4 to Quads 1 and 3 with
3/8” hardware (items 28, 29, 30, 31)
See Detail C.
E) At this time tighten all the 1/2”, 3/8” and
insert hardware alternating from one
side of a quadrant to another in a
circular pattern starting at the center
and working outward. Check the face of
the reflector while tightening to insure
all mating edges are flush.
C
B
A
A
C
B
Quadrant 4
Quadrant 1
