7
1.
Unplug the unit from the electric outlet. Remove can
opener from mounting bracket by pushing up on tab of
bracket. Slide the unit back and off the mounting bracket.
2.
To remove the piercing lever assembly, lift up lever and
push counter-clockwise until the whole assembly is
released.
3.
Wash piercing lever in automatic dishwasher. Or wash
in warm soapy water; rinse and dry thoroughly.
4.
To replace the piercing lever assembly, fit the knob on the
back of the assembly into the large end of the keyhole
on the can opener. Slide and push the knob toward the
small end of the keyhole until it snaps into place.
5.
To clean the unit, wipe with a clean, damp cloth. Do not
immerse unit in water.
Cleaning Your Can Opener
Customer Service
Call our toll-free customer service numbers. Please note
the model, type, and series number on the bottom of the
can opener, or have the can opener close by when you
call. This will help us answer your questions.
In USA: 1-800-851-8900
In Canada: 1-800-267-2826
Web Site Address: http://www.hambeach.com
KEEP THIS NUMBER FOR FUTURE REFERENCE!
6
Tips
• The movable magnet may need to be placed onto the
lid of smaller cans.
• This can opener is designed to open cans only when
mounted under a cabinet. The motor will operate if the
unit is not installed, but do not attempt to open cans
unless properly mounted.
• If there is a bump in the rim of the can, open the other
end or begin the cutting action just after the bump.
• For extremely large or heavy cans, it is recommended
that you lightly support the can as it is being opened.
To Open Bottles
Insert top of bottle so cap is under
the metal hook. Lightly hold the
back of the can opener and then
press the bottle down until cap is
removed.
To Open Bags
Place the upper right corner of
the bag in the bag opener slot.
Support the bottom of the bag
with one hand and slide the
bag to the right until the bag
is opened.
