EN|ENGLISH
3
Do not use tool if switch does not turn it on or off.
Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing the tool
.
Such preventive safety measures
reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and other untrained persons
.
Tools are
dangerous in the hands of untrained users.
Maintain tools with care. Keep cutting tools sharp and clean
.
Properly
maintained tools with sharp cutting edges are less likely to bind and are easier
to control.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tools operation.
If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your
model.
Accessories that may be suitable for one tool, may become hazardous
when used on another tool.
5. Service
Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of
injury. When servicing a tool, use only identical replacement parts. Follow
instructions in the Maintenance section of the manual. Use of unauthorized
parts or failure to follow Maintenance instructions may create a risk of electric
shock or injury..
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tools operation.
If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your
model.
Accessories that may be suitable for one tool, may become hazardous
when used on another tool.
SPECIFIC SAFTETY RULES
DO NOT let comfort or familiarity with product (gained from repeated use )
replace strict adherence to Nibbler safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury.
1. Always be sure that the tool is switched
off and unplugged before
carrying out any work on the tool.
2. Always lead the power supply cord away from the tool towards the rear.
3. Do not touch the blade or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
