EN|ENGLISH
6
sandpaper block dangerous cutting damage, and lead to stuck or broken recoil
sandpaper.
Additional Warning Description
- When working with both hands firmly gripping the machine and placed in a stable
position. Please hands gripping the machine, for safer operation.
- Or spontaneous combustion if longevity potentially explosive dust during the
grinding process, the material must comply with the manufacturer's processing
instructions in any case.
- Harmful / toxic dust (for example, lead paint, some of the wood or metal shavings)
during operation. These contact with dust, especially dust inhalation of these will give
operators and nearby personnel at risk. Observe the safety regulations of the country
will be connected to a suitable power tool dust collector. To protect your health, please
wear protection mask P2.
- Do not use a damaged cable machine. Do not touch the damaged cable, if the cable
is damaged during operation, remove the plug from the mains power supply. Damaged
cable will increase the risk of electric shock.
- Do not use coarse grinding mill items, so as not to damage the self-cleaning blades.
5.3 Noise and vibration amplitude
Measured according to standard EN60745 following typical data:
Sound pressure
74 db
Noise
85 db
Measurement uncertainty margin
K = 3 Fenbei
Noise generated when the work may harm your hearing.
Wear ear protection!
Determined in line with the overall vibration value EN60745 (vector sum of three
directions) as follows:
Vibration (triaxial):
ah <3.84m / s2
Measurement error allowable value:
K = 1.5m / s2
6 Power and Startup
If you use a non-approved operating voltage or frequency machine, there will be the
risk of accidents. Mains voltage and mains frequency must match the specifications on
the machine nameplate.
7 machine settings
Accidents and electric shock. To unplug the machine before any operation.
7.1 Installation
- Before the operation, using the disc down stick pan support, the joint and dust
collector tube Access Chu Chen mouth the other end, dust collector pipe access dust
bag; and then the auxiliary handle installed on the machine.
- If you need to set the edge sanding corners cover removed.
7.2 Electronic Control
Features of the machine with the following property is a full-wave electrical equipment:
Smooth starting
