Procomp BVD2A Manual Download Page 4

Page: 4 / 55

BVD2A

~3~

The

BVD2A

motherboard is a high-performance device that offers full

functionality at a low cost. Its ease of use and reliability will become evident
from the very start.

1.1 ABOUT THE MANUAL

This manual contains the following information:

CH1. Motherboard Feature Introduction – Introduces the features of the

BVD2A

board, and provides a checklist of items that are shipped with

the package.

CH2. Setup guide – Guidelines on how to install the motherboard and how to

get your system up and running.

CH3.

Award BIOS Setup – Explanation of the BIOS setup items, for
configuring your motherboard for optimum performance.

CH4.

Software Setup – How to install the software drivers and support
programs that are provided with this motherboard.

1.2 SPECIFICATIONS

System Chipset

VIA Apollo Pro-Plus 133A
(VT82C694X and VT82C596B)
with AGP solution.

Processor

Intel Socket370 PPGA and FCPGA
at 300MHz ~ 750MHz

Bus
Architecture

AGP/PCI/ISA

Summary of Contents for BVD2A
























































Search results

Summary of Contents for BVD2A

Reviews:

Related manuals for BVD2A

Brands by name

Popular brands

Procomp BVD2A, Manual

Search results

Summary of Contents for BVD2A

Reviews:

Related manuals for BVD2A

Brands by name

Popular brands