BVD2A
~18~
JP6 - BUS SPEED SETTING
CLOCK
1-2
3-4
Auto
Short
Short
100 MHz
Open
Short
133 MHz
Short
Open
2.3-2
Memory installation
No jumper changes are necessary for DRAM setting; the system BIOS will
check DRAM type and size automatically. This motherboard contains 3
168-pin DIMM sockets (DIMM1, DIMM2, DIMM3). The motherboard has a
table-free (or auto-bank) feature; memory can be installed into any free DIMM
bank. The three DIMM Sockets permit system memory expansion from 8MB
to 768MB. Each bank provides a 64-bit wide data path. You can install
133MHz or 100MHz SDRAM into the motherboard, using your CPU clock to
make the selection.
If you want to install more memory and there are no sockets available, you
must remove some installed modules and replace them with the upgrade
modules. If you have to do this, be sure to identify what type of memory is
