manualshive.com logo in svg

Procomp BVD2A, Manual

Share
Download
Procomp BVD2A Manual Download Page 32

BVD2A

                                                          

 

 

~33~

 

PC Health Status

 

This setup page shows a list of hardware monitoring results. 

 

Frequency/Voltage Control

 

This setup page allows you to define clock and system bus speeds. 

 

Load Fail-Safe Defaults

 

This page allows you to load the BIOS chipset defaults, indicating the 
minimum values required by the system for the normal operation. 

 

Load Optimized Defauls

 

This page allows you to load optimized BIOS chipset values, for enhanced 
system operations. 

 

Set Supervisor/User Password Setting

 

Use this page to set, change, or disable password protection. It allows you to 
limit access to the system and/or setup utility. 

 

Save & Exit Setup 

This option save s all changed CMOS values and exits the setup utility. 

 

Exit Without Saving 

This option exits the setup utility without first saving any recent modifications 

you might have made. 

Summary of Contents for BVD2A
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands