PRO-COM OWNER’S MANUAL
VENTED GAS LOGS 14 WAL21-01
LOG NO. SHOW AS FIGURE 1:
WAN30LA
LOG INSTALLATION
Figure 1- Log NO.
LOG PART NO. DESCRIPTION
Model
Part No.
Bottom Logs Qty.
Top Logs Qty.
WAN30LA WAB08
3 Piece Set
6 Piece Set
Figure 2-Installing Grate Steps
Figure 3-Installing Back Log
Figure 4-Installing Front Logs
INSTALLING THE GRATE AND LOGS
1.Slide the two rear log grate steps over the two
outer horizontal supports on the grate as
shown in Figure 2.
2.Place the back log#1 onto the grate steps (see
Figure 3).
3.Place the front logs #2,#3 on the grate and
slide forward against the front bars on the
grate (see Figure 4).
4.Place logs #4, #5, #6 onto logs #1,#2, #3 by
inserting log 1’s locating pin into lower hole of
logs #4,#5,#6 (see Figure 5).
5.Place log #7 onto logs #4, #5 by inserting log
4’s locating pin into lower hole of log #7 (see
Figure 6).
6.Place log #8 onto logs #2, #4 by inserting log
4’s locating pin into lower hole of log #8 (see
Figure 7).
7. Place log #9 onto logs #5,#6 by inserting log
4’s locating pin into lower hole of log #9 (see
Figure 7).
NOTE:
1. Leave as much open space between top
logs as possible to minimize flame
impingement and sooting.
2. Logs may chip if they are handled roughly
or if hit together while being placed.
