background image

Page 1

21088-2-0706

INSTALLATION INSTRUCTIONS 

AND OWNER'S MANUAL

LOG SET FOR UNVENTED 

GAS LOG HEATER 

OR

VENTED DECORATIVE APPLIANCE

MODELS

LS-18B2-1

LS-24B2-1

LS-30B2-1

Birch Logs

WARNING: If not installed, operated and main-

tained  in  accordance  with  the  manufacturer's 

instructions,  this  product  could  expose  you  to 

substances in fuel or from fuel combustion which 

can cause death or serious illness.

Log  sets  comply  with  ANSI  Z21.11.2  Unvented 

Heaters  and  also  comply  with  ANSI  Z21.60 

Decorative  Vented  Appliances  for  Solid  Fuel 

Burning Fireplaces. State or local codes may only 

allow operation of log sets in a vented configuration. 

Check your state or local codes.

WARNINGS

–  Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any 

other appliance.

WHAT TO DO IF YOU SMELL GAS

•  Do not try to light any appliance.

•  Do not touch any electrical switch; do not use 

any phone in your building.

•  Immediately  call  your  gas  supplier  from 

neighbor’s phone. Follow the gas supplier’s 

instructions.

•  If you cannot reach your gas supplier, call the 

fire department.

–  Installation and service must be performed 

by a qualified installer, service agency or the 

gas supplier.

If the information in this manual is not fol-

lowed exactly, a fire or explosion may result 

causing property damage, personal injury or 

loss of life.

The 

White Mountain 

Log Collection

EFFECTIVE DATE

JULY 2006

INSTALLER: Leave this manual with the appli-

ance.

CONSUMER: Retain this manual for future 

reference.

Summary of Contents for LS-18B2-1













Reviews: