Procom EDP200T2-C, Manual, Page: 1 / 27

Questions about installation, operation, or troubleshooting? Before returning to your retailer, contact our
customer service department at 1-877-886-5989, 8:00 a.m. - 4:30 p.m., EST, Monday-Friday or e-mail
customerservice@usaprocom.com
ED200T2 651-0903
CAUTION – FOR YOUR SAFETY
–
Do not store or use gasoline or other flammable vapors and liquids in vicinity of
this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
·
Do not try to light any appliance.
·
Do not touch any electrical switch; do not use any phone in your building.
·
Immediately call your gas supplier from a neighbor ’ s phone. Follow the gas
supplier ’ s instructions.
·
If you cannot reach your gas supplier, call the fire department.
– Installation and service must be performed by a qualified installer, service agency
or the gas supplier.
INSTALLER: DO NOT DISCARD THIS MANUAL – LEAVE FOR HOMEOWNER ’ S
FUTURE REFERENCE.
WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED
EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL
INJURY, OR LOSS OF LIFE.
This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is
installed. Provisions for adequate combustion and ventilation air must be provided.
Refer to
Air for Combustion and Ventilation section on page 7 of this manual.
This appliance may be installed in an aftermarket*, permanently located manufactured
(mobile) home, where not prohibited by local codes. This appliance is only for use with
the type of gas indicated on the rating plate. This appliance is not convertible for use
with other gases.
WARNING: This appliance is
equipped for (Natural and
Propane) gas. Field conversion is
not permitted other than between
natural or propane gases.
VENT-FREE FIREPLACE
MODEL # EDP200T2-O
EDP200T2-C
EDS200T2-HC