Configuration & Installation
2
23
The end drive connector on the ribbon cable is for
the Master IDE device and the middle connector is
for the Slave device. The supplied cable supports
IDE devices in all modes.
If you want to install devices on the second IDE
channel, you will need to purchase an additional IDE
ribbon cable. If you want to use IDE devices that use
the UDMA66 data transfer mode, you will need to
get an IDE cable that specifically supports
UDMA/66 like the supplied cable.
Other Connections
There are several other connection points on the
motherboard which you will or may need to use.
These include the port bracket connectors, the con-
nectors for CD-ROM drive audio input and the IR
port connector.
