Page 10
4.1 Display
The ZGM 1130 is equipped with a touchscreen (1) in order to receive inputs from
the user.
4.2 Measuring Button
The measuring button (4) is used to start, stop measurements or to switch the
device off if configured. It is also used to exit the menu from any point and return
back to the measuring window. Beside this it has the following functions:
•
Trigger a single measurement
•
Start / stop a scan measurement
•
Start / stop interval measurements
4.3 Power Supply
The ZGM 1130 is powered by an internal rechargeable battery which can be
charged over the USB port. Either a standard PC USB port or a high power USB
charger like included in the delivery of the ZGM 1130 can be used.
However, special attention should be payed to the USB cable since fast charging
can only be reached when the supplied cable is used.
If the device is charging,
will be displayed in the upper right corner of the
display.
Only a Proceq Service Center is allowed to replace the battery.
4.4 Automatic System Check
The ZGM 1130 provides an automatic system check functionality. The device is
turned on when placed on the calibration standard a system check will be
performed during the startup phase. Whenever needed, the system will inform you
about possible issues and instruct you to carry out the necessary steps to eliminate
the problem.
