Proceq Zehntner ZRM 6006, Instruction Manual

Page: 14 / 32

14
7 Measure
After switching on the ZRM 6006 a splash screen is
displayed, which shows the firmware version.
After about 2 seconds the instrument switches to the
main screen, displaying the measured values, the
temperature and the relative humidity. Additionally the
battery and charger status and eventual warnings (BAT
LO, BAT CRIT) are displayed.
To make a measurement press the measuring button
shortly (not more than 4 seconds).
7.1 Carrying out exact measurements
The ZRM 6006 should be placed as even as possible. Put the ZRM 6006 on the
sample or marking to be measured. For unevenness from -1 mm up to 5 mm in
longitudinal direction, the given measuring geometry is warranted. Bigger
unevenness may lead to wrong measuring results. Please observe in such cases
the chapter 7.2
“Measuring profiled markings from 5-12 mm” as from page 16.