Proceq 393 50 000, Quick Start Manual

Page: 19 / 40

Declaration of Conformity
Proceq GP8000, Proceq GP8800 Products:
all
393 10 x00, XXX XX XXX
This document (incl. Quick Start Guide and Product Certificates) constitutes an integral
part of Proceq’s General Terms and Conditions of Sale and General Terms and
Conditions of Rental, together with any other guideline, precautions, policies and
conditions which Proceq has made and may make available to you at
www.proceq.com/downloads, as amended from time to time (the Documents). Proceq
reserves the right to change without notice any information, specifications and
recommendations contained in this document and in any of the associated Documents.
You shall observe and be solely responsible for the safe and lawful use of this product,
as well as your conduct while using it and any consequences arising thereof. The use
and operation of this product is at your own discretion and risk. Proceq hereby
disclaims any and all loss, liability or damages resulting from or out of your use of the
product. Please ensure you operate and use this product only for purposes that are
proper and in accordance with the instructions given herein together with all safety and
health precautions, applicable laws, rules, regulations, and as provided for in any of the
Documents.
Notice
Products:
Proceq Part Numbers:
Manufacturer:
Map MA8000
393 50 611
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
We confirm that the Map MA8000 product is in conformity with RoHS, WEEE and the
following directives and standards:
Low voltage directive:
Safety requirements:
RoHS directive:
RoHS:
RED directive:
Electromagnetic compatibility:
FCC:
Connection:
Bluetooth module:
2014/35/EU
EN61010-1:2015/IEC61010-1:2010
2011/65/EU
EN50581:2012
RED 2014/ 53/EU/
EN61326-1:2013/IEC61326-1:2012
EN ETSI 301 489-1 V2.2.3
EN ETSI 301 489-19 V2.2.0
CFR47 Part 15
Bluetooth Low Energy
Contains FCC 10: WAP 2001/WAP2005
Contains IC ID: 7922A-2001/7922A-2005
Swiss Made Declaration
We confirm that the Map MA8000 product was developed and manufactured in
Switzerland and fulfills the requirements needed for the declaration “Made in
Switzerland” or “Swiss Made”.
The requirements for industrial products are specified in detail in the National Swiss
Trademark Protection Statute (Art. 47-50, MSchG) covering goods and services.
Products:
Proceq Part Numbers:
Manufacturer:
Map MA8000
393 50 611
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
EN
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. This Class B digital apparatus complies with Industry Canada RSS standards.
To comply with FCC and Industry Canada RF radiation exposure limits for general
population, the transmitter with its antenna must be installed such that a minimum
separation distance of 20 cm is always maintained between the radiator (antenna) and all
persons and must not be collocated or operating in conjunction with any other antenna or
transmitter.
Patrick Waller
Chief Operating Officer
Schwerzenbach, 30.10.2020
Patrick Waller
Chief Operating Officer
Schwerzenbach, 30.10.2020