29
GB
Place the shelves (D) in the unit and insert
end plugs (E) into the top of each post (A).
Assembly as a low wide shelving
unit
Assemble an end piece by � tting a side
piece (C) into the bottom holes on the two
post parts (A).
The narrow edge on the side pieces should
be facing upwards and the broad edge
should be facing downwards.
Hammer the parts together using a rubber
mallet or a hammer and a block of wood to
protect the surface of the parts. Hammer as
close as possible to the post parts. Do not
hit too hard to avoid deforming the parts.
Insert cross-pieces (B) into the two bottom
holes on the post parts and � rmly insert the
cross-pieces into the bottom holes on the
last 2 post parts at the other end.
Hammer a side piece securely between the
last two post parts.
Fit the parts in the order as shown by the
numbers 1-5 in the illustration.
