probst 5150.0022, Operating Instructions Manual

Page: 29 / 157

Maintenance and care
27 / 36
5150.0022+5150.0023 (41500820)
V3
GB
Regular Inspections
(refer to enclosed KUBOTA operating manual)
To maintain efficient engine functions and to ensure long engine service life, inspections are required at scheduled intervals in accordance with the
following table.
No.
Description
( * Order number see proof of maintenance f)
First 50 h Every 200 h Every 1000 h Every year
1 Exchange engine oil (SAE 15W40 ~ 4 l)
  
2 Exchange oil filter *
   
3 Exchange hydraulic oil (RANDO HLP 46 ~ 25 l)
  
4 Check level hydraulic oil if necessary refill (RANDO HLP 46 ~ 25 l)
 
5
Exchange hydraulic oil filter
*
  
6 Clean air filter (renew when strong pollution) *
   
7 Exchange fuel filter *
 
8 Exchange fuel pre-filter *
  
9 Check fuel pipes and hose clamp
   
10 Check battery acid level and oxidized connections
  
11 Check fan belt tension (fan wheel)
  
12 Exchange fan belt (fan wheel) *

13 Check radiator hose and hose clamp (if necessary renew)
  
14 Remove sediments from fuel tank

15 Check cooling ribs on pollution
 
16 Check electric wiring for loose connections
   
17 Replace ignition tube and hose clamp
 
18 Recharge the battery (if necessary renew)
 
19 Check cooling water level (if necessary refill)
   
20 Exchange cooling water including antifreeze (~ 4 l)
 
21 Check antifreeze in cooling water (before each frost period)
 
22 Check opening pressure of radiator cover lid
 
23 Check jet opening pressure

24 Check compression pressure

25 Check hydraulic hoses on leakages (retighten connections)
  
26 Check function of instruments and operating elements
  
27 Check VM for defective, distorted construction units and abnormal noises
  
28 Retighten all screws and nuts, replace missing screw connections
  
29 Check tyre pressure (front 2,5 bar/36 psi, rear 2,2 bar/32 psi)
  
30 Lubricate according to lubrication chart
  
31 Check ball joint on strength (135 Nm)
  
32 Check carrying construction units on cracks
  
33 Retighten all wheel nuts (130 Nm)
  
34 Check hand brake (if necessary readjust 3-4 teeth)
 
35 Check wheel bearing and axle bearing (if necessary readjust)

36 Check steering clearance (if necessary renew spherical head or tie rod) *

37 Check dynamo

38 Adjustment valve clearance of rocker lever (0,15 mm)
