probst 5150.0022, Operating Instructions Manual, Page: 20 / 157

Description and Operation
18 / 36
5150.0022+5150.0023 (41500820)
V3
GB
4.1.7 Control displays
Oil pressure control
The oil control light (12) has to be illuminated when the ignition (13) is on step 1.
The light must not be illuminated when the motor is running.
Battery control
The battery control light (14) has to be illuminated when the ignition (13) is on step
1. The light must not be illuminated when the motor is running.
Temperature control
If the water temperature control display (15) is in the red section, the air filter has
to be cleaned or renewed. The cooling fins of the radiator have to be cleaned with
compressed air and the cooling water has to be checked.
If the temperature control display is still in the red section please contact a
qualified workshop.
Pre-heat
Turn ignition to step II until the pre-heat control display (17) is illuminated After a
short time (approx. 25 sec.) the pre-heat control display has to stop the
illumination. This means that the engine can be started now by turning the ignition
to step III
Fuse box
The fuse box is behind the covering of the control displays. For changing fuses
remove the fixing bolts at the control-displays covering.
Horn/Reset – driving (safety
seat switch)
Button for horn / reset button:
Press reset button each time for the driving, when the machine will be started and
when the driving was stopped caused by the standing up of the diver from the
driver´s seat (triggered by the seat switch).
The reset button only works, when the driver is sitting on the s seat.
(15)
(12)
(14) (17)
(13)
Hour
meter
Horn/Reset driving
light Turn signal indicator
Fuse box