Installation
HVZ-uni
V7
18/06/12
12 / 36
5
Installation
5.1
Mechanical connection
There is a suspension to connect the hydraulic installation clamp mechanically to the lifting device/support
frame.
The 2 point suspension is equipped with a spring for
vibration damping.
5.2
Hydraulical connection
Two separate hydraulic circuit are required to
connect the HVZ-uni to the equipment used to
operate the HVZ-uni (excavator, wheelloader,eg).
The hydraulic tubes are connected to the valve block.
The max. pressure for both hydraulic circuits is 200
bar.
The connections are related to the following functions:
Hydraulic circuit 1
●
OPEN and CLOSE main gripping direction
Hydraulic circuit 2
●
OPEN and CLOSE side gripping direction
Hydraulic circuit 2
Hydraulic circuit 1
Suspension
Adjusting chain
Spring
Suspension
chain
