background image

PROAIM SPIN PAN TILT HEAD                                                                                                                 10 

 

WARRANTY 

 

We offer a one year warranty for our products from the date of purchase. 

 

We  will  repair  or  replace  your  product,  free  of  charge,  in  the  event  of  a  defect  in  materials  or 
craftsmanship  obtained  during  normal  use  or  handling  based  on  the  user  manual.  Please  note 
that  we  will not  cover  any  shipping  costs  for  returning  the  product  to  us.  If  any VAT  or  import   
duties are applied to the return, we will also charge these costs to the customer.  

 

The warranty does not include, by the way of example, damage caused by products that we do 
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product , 
or service by anyone other than our company.  

 

We are not liable for incidental or consequential damages resulting from the use of the unit or 
occurring due to any breach of this warranty.  

 

Replacement parts of the product will be provided at nominal cost (covering the cost price of the 
replacement parts only) to the customers after the Warranty Period has expired. We will cover  

 

the complete cost of sending replacement parts within the warranty period. After that, Nominal 
cost of the product & Actual shipping cost will be charged.  

 

Do not send the unit to us without first getting a response and getting the approval to send back 
the item. 

 

In case of any kind of dissatisfaction, we urge you to

 

Contact us

 

immediately and we shall do our 

Best to help you out. For any other assistance you can reach us via email. 

 

For any other assistance you can reach us via email. 

Summary of Contents for PT-SPN











Reviews: