PROAIM SPIN PAN TILT HEAD 5
Install the jib-head connector on the Jib
arm with the 4x ¼”x1” screws, washers
and nuts.
Then, attach the SPIN Pan-Tilt Head with the jib to head connector. Align the screw holes
in the mounting extension and insert the screws to tighten the head.
INSTALLING THE HEAD & ACCESSORIES
Install your cable starting at the camera end making sure to leave enough slack for full
pan & tilt movements. Adding a Velcro strap (not supplied) to loop the cable around the
jib arm, helps prevent cable snags and tangles.
Attach & secure your camera on the
camera platform of Head with the
help of provided chuck nut.
