PROAIM 10' Wave-2 Plus Telescopic
Jib
Arm
Crane with CST-100 Stand & Portable Dolly 5
Unscrew the knob to extend jib arm at back and retighten the knob. Secure all the
connections.
NOTE
It is important to make sure that the Central Fork is seated in the bowl properly. That
means perpendicular to the tripod bowl. Off axis installation may hamper movement of the jib.
Also you may need the assistance of a grip stand to hold the camera end of the arm during
installation preventing it from falling as it will be front heavy at this point. You may also need
the grip stand or assistance at the rear of the jib when mounting the camera.
Now slide in weight to it as per your requirement and screw in weight closer properly.
(Counter weight
NOT
INCLUDED
)
Insert the weight bar into the jib arm.
