PROAIM E- FOCUS PRO ZOOM 5
DETAILS OF MOTOR DRIVE GEAR
ASSEMBLING OF MOTOR DRIVE GEAR
Insert one motor drive gear on one rod to attach it to the focus ring of camera. Using the
same approach, insert other motor drive gear on the other rod to attach it to the zoom ring
of the camera.
Match the gear teeth of gear belts and motor drive gear properly
for smooth functioning. Tighten the gear properly with provided
screw.
DETAILS OF REMOTE
Motor Drive Gear
Motor
Ratchet
knob
Adjustment
ratchet knob
Inbuilt Motor
Wire
15mm rail
mount
The Motor drive gear has 15mm rail
mount to mount on your 15mm rod sup-
port.
The built-in gearbox block on zoom and
focus brackets enables smooth working
of gear.
E-Focus Control provides smooth manual
focus control of lenses.
Top View
ON/OFF
Switch
4 pin male Lemo
Connector for
battery wire
Back View
15mm Rail mount
Front/Side View
Focus Knob
Zoom Knob
Battery Mount
Ratchet knob
Attach the remote to the 15mm rod support and tightened the knob
to secure it properly.
