Usage instructions Adapter & Adaptation
32
Standard setting for 20'' wheel
Clamping plate
holder
Clamp cover
Clamp steering
head connection
Steering head
connection
Standard setting
Wheel 20"
Clamp cover low
assembly position
Angle adjust-
ment directed
7.5° upwards
Holder drill hole for
clamp cover as-
sembled high; ten-
sioning screws
directed forwards
High position;
steering head
connection up-
wards
Additional set-
ting options for
third party prod-
ucts or special
dimensions
Assembled in the
middle or high,
each +25 mm to
default setting
Pointed down-
wards -45 mm
to default set-
ting; angle bal-
ance on frame
15° to front
Assembled low
+50 mm to default
setting; tensioning
screws forward
Pointed down-
wards -35 mm
to default setting
The clamp cover is available in different lengths:
•
Standard: 80 mm
•
Extended lengths: 110 mm, 170 mm
Clamping plate
holder
Clamp cover low in clamping
plate holder and 7.5° upwards
Clamp steering head
connection
Tension screws forward
Clamp cover
Clamp steering head
connection sloped up
and backwards
Holder drill hole
for clamp cover
assembled high
