9
6c. REMOTE CONTROL RELEASE SOCKET (ELECTRONIC)
Located to right (right-rear) of the viewfinder, this socket takes a special
electronic remote control lead plug, which is included in all rental
packages. You must use this remote release cable in the socket for any
frame rate above 24, (slow-motion).
•
When using the remote, the shutter will not always
stop in the closed position. This will sometimes block
the viewfinder. This soft stop protects the mechanism
stop pin and the motor. If viewfinder is blocked: turn
remote on and off real fast, this should reset the finder
so you can see.
6d. REMOTE CONTROL RELASE SOCKET (MECHANICAL)
Located inside the trigger, this socket is used in conjunction with any
standard deep-throated threaded cable release.